Author Archives: Thomasina Cummings

About Thomasina Cummings

My name is Tammy, and I am the designer and publisher behind Thomasina Cummings Designs. I started writing crochet patterns in 2012, after being teased by my loved ones that I was getting old and might forget them ;) What started out as a way of preserving my ideas soon blossomed into the business you see today - one that fitted perfectly around my hectic family life. Each pattern takes around 2 months to create - from initial idea, to creation, through several stages of testing and eventual publication. I am extremely grateful to my testers who work hard to make sure everything is a clear and correct as possible, and to Sarah (Sweet Pea Photography) who so beautifully captures the photo props in use ♥ I do hope you find something you like.

Tutu Dress

This tutu dress with its fabulous, highly textured tube bodice and matching headband is the perfect photo prop for your newborn princess or for fancy dress/party wear as your little princess grows up.

Tutu Tube Dress

Instructions for how to work to custom sizes (and adjust for different yarn types) between ages newborn – 12 years are included.

YOU WILL NEED 200 – 500 m double knit or Aran yarn, an appropriate sized hook, lengths of matching ribbon tulle (15 cm/6” width), ribbon (optional for straps) and a needle for neatening ends.

GAUGE varies with yarn and size made.

Both length and width are adjustable using the custom sizing/yarn instructions.

Size Chart with suggested measurements is included.

Pattern is written in UK terms with a table of US equivalents provided as applicable.

Pattern is fully tested.

Making Ribbon Bows

To make the ribbon bows used in the Halloween Princess Set, you will need:

  • 2 lengths of ribbon – one twice as long as the first
  • A 4 pronged kitchen fork – size not important….it’s only acting as an extra pair of hands
  • A piece of strong cotton for tying off
  • A pair of scissors
  • A lighter (optional – for sealing the ends of the ribbon to prevent fraying)

GEDSC DIGITAL CAMERA

Take the piece of cotton and place it between the centre prongs of the fork.

GEDSC DIGITAL CAMERA

Next place the shorter of the two ribbons behind the fork.
Bring the ends loosely around the fork and thread through the centre as shown below:

GEDSC DIGITAL CAMERA

Bring the cotton up and tie firmly around the folded ribbon.

GEDSC DIGITAL CAMERA

Slide off the fork and trim the cotton.  Voila! A tiny bow!

GEDSC DIGITAL CAMERA

For the long bow, take the longer of the two pieces of ribbon and fold it over the cotton in the middle of the bow.

GEDSC DIGITAL CAMERA

Stitch or glue in place – I usually use a hot glue gun for this step and add a button or bead to the middle of the bow.

Finally, trim the ends (at an angle) to the desired length.

GEDSC DIGITAL CAMERA

If you are concerned about fraying, hold a lighter flame CLOSE to the ends of the ribbon…..not too close or you will burn the ends instead of melting them a little.

Now for the confession.  While a fork is a great little tool for making one or two bows, in reality, it’s not the most practical solution.

If you are making loads of bows in different shapes and sizes, why not make a bow blob!?

Copy the following onto card and use it in the same way as the fork!
Do let me know how your bows turn out :)

Bow Blob

(C) Thomasina Cummings Designs

 

Crochet Spider Web for Halloween

Halloween Trim – Spider’s Web. Free Pattern

Crochet Spiders Web

The pattern is in UK terms.

The following abbreviations are used
ss = slip stitch
ch = chain
tr = treble

Using as thin a hook and yarn combination as you can, commence with 6ch, ss to first ch to make a ring.

Note:  3 of the initial  ch in each round will count as the first tr in each round.

  1. 6ch, (1tr, 3ch) 6 times into ring, ss to 3rd of 6ch to join.
  2. 8ch, (1tr in top of next tr, 5ch) 6 times, ss to 3rd of 8ch to join.
  3. 10ch, (1tr in top of next tr, 7ch) 6 times, ss to 3rd of 10ch to join.
  4. 5ch, ss in 2nd ch from hook, 9ch, (1tr in top of next st, 2ch, ss in top of same tr, 9ch) 6 times, ss to 3rd of 5ch.

Stitch into place as desired.

Errata Peapod

Errata – Peapod:

Apologies but an error has been found in the row numbering on the stalk.  It should read:

Peapod

Rnd 2: 2ch, 2tr into each of next 3sts, 1tr into next st, ss to 2nd of 2ch – 8sts.
Rnds 3 – 7: as rounds 2-6 of peapod – 28sts.
Rnd 8: …

Updates are available automatically on Ravelry.  If you purchased from Etsy and would like an updated copy, please contact me quoting your order number and I’ll get it straight out to you.

Crochet Crown and Headwear Accessory eBook

The Headwear Accessory Pack contains three crochet patterns.

Crown 1 is suitable for baby photographs (prince or princess), dressing up, occasional wear or ‘hen’ parties.

Crown

It can be worked in sizes 20-55 cm (8-22”)

You will need: up to 100 m double knitting yarn, a 3.50 mm hook and a needle for neatening ends.

A flower embellishment is included, although you may also like to use beads and/or ribbon to decorate your crown.

Gauge: 8sts to 5 cm (10”) in UK double crochet. Depth of crown at maximum is 7 cm (2½”).


The headband/ear warmer has instructions for 35 (40, 45, 50, 55) cm or 14 (16, 18, 20, 22) inches. Custom sizes are possible and this is explained at the appropriate section of the pattern.

Crochet Headband

You will need: up to 100 m of yarn, an appropriate sized hook, a needle for neatening ends and a stitch marker – the band can be made using oddments in any thickness with successful results


Crown 2 is the perfect prop for your little prince.

Crown Prince Crochet

Can be worked in sizes 30-50 cm (12-20”).

You will need: up to 100 m double knitting yarn in MC and CC, a 3.50 mm hook and a needle for neatening ends. Beads and trims and a small amount of stuffing are optional.

Gauge: 8sts and 4 rows to 5 cm (2”) in UK double crochet.

 

Crochet Perfectly Pixie Hat

Perfectly Pixie and ever so sweet!

This crochet pixie hat pattern includes instructions to make a range of sizes for the daintiest newborn photo prop through to a full-of-fun adult size.

Beautiful pictures below provided courtesy of Amanda Ochocki (chalklegs).  Thank you so much ♥

The pattern uses the back loops for amazing shaping and texture, is worked seamlessly from side to side and can be made with, or without the ties.

You will need up to 200 m Aran/WW yarn, a 5.00 mm H hook, a 4.00 mm G hook, a needle for neatening ends and a stitch marker (optional).

Gauge: 8sts and 10 rows to 2” in back loop sc. Hook and yarn may be adjusted to achieve
gauge.

Two files are uploaded – US and UK versions of the pattern.

Long Tailed Hat

This simple-to-work long tailed hat can be made in any size, from newborn to adult, and in so many different ways.

Add a fluffy trim and a pom-pom for a cute, newborn photo prop.  Work it in stripes for Santa’s elves or maybe use your favourite team colours – the tail makes a great scarf to keep you warm on cold match days!

Note:  Baby sizes are provided with photo prop use in mind.  This hat is not suitable for everyday wear in young babies.

Long Tailed Hat

Materials:  Any yarn can be used but DK, 8-ply, worsted weight, Aran or light chunky will give the best results.  Use with an appropriate sized hook.  Maximum expected amounts 600m for adult male.

Gauge – gauge is not important as long as you work to sizes indicated in the size chart.

This pattern is written in UK terms with US equivalents provided as applicable.

Frilly Crochet Ruffle Wrap

This over-the-top frilly crochet ruffle wrap is perfect for newborn photo shoots and can be worn alone, or teamed with a host of accessories.

Frilly Wrap Crocheted with Ruffle Yarn

The frill is worked afterwards and may be left off for unisex use. Or, if frills don’t appeal, you can replace it with ribbon, lace, flowers, a bow, a pompom, etc.

For newborn size, you will need: Approximately 150m DK yarn and 10m ruffle yarn, 3.50mm hook, a button, 4 stitch markers and a needle for neatening ends.

Buttons loops are sized to fit a 2.5cm (1”) diameter button. Size can be varied and you will be instructed where to make changes in the pattern.

Instructions are included for working to fit preemie, 3 month and 6 month old babies also. Please note yarn thickness, hook size and quantities will differ from those quoted for the newborn size.

This pattern is written in UK terms with a table of US equivalents provided as applicable.

Crochet Dungarees

This pattern contains instructions to make these soft, squishy, knit-look crochet dungarees in a range of sizes from birth to 1 year old.

Crochet Ribbed Dungarees

You will need: up to 200 g (288m) Aran in main colour (MC), 100g (144m) Aran in contrasting colour (CC), a 4.50mm hook, 2 buttons (decorative only) and a needle for neatening ends.

In the example, the MC is cream and the CC is chocolate brown.

Gauge: 8sts and 8 rows to 5cm (2 in) in UK dc worked in back loop only.

The pattern is written in UK terms with a table of US equivalents provided as applicable